ZP2000 RF admittance level switch is a replacement product of capacitive level switch, which solves the problem of material adhesion and has higher system stability compared to other similar products. Even under extremely harsh on-site conditions, it can work reliably without being affected by hanging materials, temperature, pressure, material density, humidity, or even changes in material chemical properties. Widely used in the detection of various materials, including fly ash, particles, powder liquids, viscous, conductive, and non-conductive materials; It can meet different temperature and pressure measurement requirements, with a maximum temperature of up to 800 ℃ and a maximum pressure of up to 5MPA; Can be used in harsh environments such as corrosion and impact. The unique circuit design and sensor structure make the measurement ignore the material on the probe and automatically correct it, without the need for regular cleaning, to avoid mismeasurement and signal errors. There are no movable parts during the measurement process (anti hanging), and there is no damage to mechanical components, requiring no maintenance. The output contact capacity is large, and there is a status indicator light indicating operation. A 0.30 second delay can eliminate the impact of material fluctuations. Anti interference: contact measurement, strong anti-interference ability, can overcome the influence of steam, foam, stirring, and measurement. Power outage protection: Normally open or normally closed (can be switched on site). Diversified measurement, making measurement more accurate, unaffected by environmental changes, high stability, and strong service life.